An HPLC method for the determination of selected amino acids in human embryo culture medium

A method for the determination of selected amino acids in culture medium using HPLC with fluorescence detection is described. Twenty hours after intra‐cytoplasmic sperm injection, one randomly selected zygote was transferred to the culture medium. After incubation (72 h after fertilization), the culture medium in which the embryo was incubated and blank medium was immediately stored at −80°C. Filtered medium samples were derivatized with ortho ‐phthalaldehyde (naphthalene‐2,3‐dicarboxaldehyde), forming highly fluorescent amino acids derivatives. Reverse‐phase columns (LichroCART, Purospher STAR RP_18e or Ascentis Express C₁₈) were used for the separation. The derivatives were analyzed by gradient elution with a mobile phase containing ethanol and sodium dihydrogen phosphate. The analytical performance of this method is satisfactory for all amino acids; the intra‐assay coefficients of variation were <10% and quantitative recoveries were between 95.5 and 104.4%. Changes in the levels of selected amino acids before and after human embryo cultivation were observed. After embryo incubation, the levels of all amino acids in the medium were increased, apart from aspartate and asparagine. After the cultivation of some embryos, amino acids which were not part of the medium were detected. Low amino acids turnover was observed in some embryos.     

A class of deformational flow test cases for linear transport problems on the sphere

A class of new benchmark deformational flow test cases for the two-dimensional horizontal linear transport problems on the sphere is proposed. The scalar field follows complex trajectories and undergoes severe deformation during the simulation; however, the flow reverses its course at half-time and the scalar field returns to its initial position and shape. This process makes the exact solution available at the end of the simulation, and facilitates assessment of the accuracy of the underlying transport scheme. A procedure to eliminate possible cancellations of errors when the flow reverses is proposed.     

Ultraperformance convergence chromatography‐high resolution tandem mass spectrometry for lipid biomarker profiling and identification

Lipids represent biologically ubiquitous and highly dynamic molecules in terms of abundance and structural diversity. Whereas the potential for lipids to inform on disease/injury is promising, their unique characteristics make detection and identification of lipids from biological samples analytically demanding. We report the use of ultraperformance convergence chromatography (UPC²), a variant of supercritical fluid chromatography, coupled to high‐resolution, data‐independent tandem mass spectrometry for characterization of total lipid extracts from mouse lung tissue. The UPC² platform resulted in lipid class separation and when combined with orthogonal column chemistries yielded chromatographic separation of intra‐class species based on acyl chain hydrophobicity. Moreover, the combined approach of using UPC² with orthogonal column chemistries, accurate mass measurements, time‐aligned low‐ and high‐collision energy total ion chromatograms, and positive and negative ion mode product ion spectra correlation allowed for confident lipid identification. Of great interest was the identification of differentially expressed ceramides that were elevated 24 h post whole thorax lung irradiation. The identification of lipids that were elevated 24 h post‐irradiation signifies a unique opportunity to investigate early mechanisms of action prior to the onset of clinical symptoms in the whole thorax lung irradiation mouse model.     

Comparison of laser Doppler and laser speckle contrast imaging using a concurrent processing system

Full field laser Doppler imaging (LDI) and single exposure laser speckle contrast imaging (LSCI) are directly compared using a novel instrument which can concurrently image blood flow using both LDI and LSCI signal processing. Incorporating a commercial CMOS camera chip and a field programmable gate array (FPGA) the flow images of LDI and the contrast maps of LSCI are simultaneously processed by utilizing the same detected optical signals. The comparison was carried out by imaging a rotating diffuser. LDI has a linear response to the velocity. In contrast, LSCI is exposure time dependent and does not provide a linear response in the presence of static speckle. It is also demonstrated that the relationship between LDI and LSCI can be related through a power law which depends on the exposure time of LSCI.     

Issue Information ‐ TOC

Numerical modeling of multiphase flow generally requires a special procedure at the solid wall in order to be consistent with Young's law for static contact angles. The standard approach in the lattice Boltzmann method, which consists of imposing fictive densities at the solid lattice sites, is shown to be deficient for this task. Indeed, fictive mass transfer along the boundary could happen and potentially spoil the numerical results. In particular, when the contact angle is less than 90 degrees, the deficiencies of the standard model are major. Various videos that demonstrate this behavior are provided (Supporting Information). A new approach is proposed and consists of directly imposing the contact angle at the boundaries in much the same way as Dirichlet boundary conditions are generally imposed. The proposed method is able to retrieve analytical solutions for static contact angles in the case of straight and curved boundaries even when variable density and viscosity ratios between the phases are considered. Although the proposed wetting boundary condition is shown to significantly improve the numerical results for one particular class of lattice Boltzmann model, it is believed that other lattice Boltzmann multiphase schemes could also benefit from the underlying ideas of the proposed method. The proposed algorithm is two‐dimensional, and the D2Q9 lattice is used. Copyright © 2016 John Wiley & Sons, Ltd.     

On the molecular mechanism of the crystal transformation (tetragonal-hexagonal) in polybutene-1

The phase transformation from the tetragonal to the hexagonal crystal modification in highly oriented lamellae of poly-butene-1 has been followed by transmission electron microscopy (TEM). It is found that the reaction-controlling step is the nucleation process. No lattice orientation relationship (besides the [001]-direction, which is parallel in both crystal modifications) exists between non-transformed and transformed crystals. The nucleation is strongly enhanced by thermal or external stresses. Crystal growth, nucleated by external stresses, was observed at temperatures as low as — 150°C. The molecular mechanisms of the transformation are discussed.     

Predicting Low-Pressure O2 Adsorption in Nanoporous Framework Materials for Sensing Applications

A set of 98 nanoporous framework material (NFM) structures was investigated by classical Grand canonical Monte Carlo simulations for low-pressure O₂ adsorption properties (Henry’s constant and isosteric heat of adsorption). The set of materials includes those that have shown high O₂ uptake experimentally as well as a subset of more than 2000 structures previously screened for noble-gas uptake. While use of the general force field UFF is fruitful for noble-gas adsorption studies, its use is shown to be limited for the case of O₂ adsorption—one distinct limitation is a lack of sufficient O₂–metal interactions to be able to describe O₂ interaction with open metal sites. Nonetheless, those structures without open metal sites that have very small pores (<2.5 Å) show increased O₂/N₂ selectivity. Additionally, O₂/N₂ mixture simulations show that in some cases, H₂O or N₂ can hinder O₂ uptake for NFMs with small pores due to competitive adsorption.     

Optimal flow conditions of a tracheobronchial model to reengineer lung structures

The high demand for lung transplants cannot be matched by an adequate number of lungs from donors. Since fully ex-novo lungs are far from being feasible, tissue engi-neering is actively considering implantation of engineered lungs where the devitalized structure of a donor is used as scaffold to be repopulated by stem cells of the receiv-ing patient. A decellularized donated lung is treated inside a bioreactor where transport through the tracheobronchial tree (TBT) will allow for both deposition of stem cells and nour-ishment for their subsequent growth, thus developing new lung tissue. The key concern is to set optimally the boundary conditions to utilize in the bioreactor. We propose a pre-dictive model of slow liquid ventilation, which combines a one-dimensional (1-D) mathematical model of the TBT and a solute deposition model strongly dependent on fluid velocity across the tree. With it, we were able to track and drive the concentration of a generic solute across the airways, look-ing for its optimal distribution. This was given by properly adjusting the pumps' regime serving the bioreactor. A feed-back system, created by coupling the two models, allowed us to derive the optimal pattern. The TBT model can be easily invertible, thus yielding a straightforward flow/pressure law at the inlet to optimize the efficiency of the bioreactor.     

Shear Stress and Dielectric Analysis of H3PO4 Doped Polyaniline Based Electrorheological Fluid

We synthesized phosphoric acid (PA) doped polyaniline (PANI) particles (PANI‐PA) and investigated their electrorheological (ER) and dielectric characteristics when they were dispersed in silicone oil. Flow curves of the PANI‐PA based ER fluid under several applied electric field strengths were analyzed using a shear stress model. We also examined ER characteristics based on the relaxation time obtained from the dielectric spectrum.     

Magnetic fluids stabilized by polypropylene glycol

A series of samples of magnetic fluids stabilized with low-molecular weight polypropylene glycol (PPG) of different molecular masses were synthesized. The use of PPG allowed the maximum extension of the carrier fluid range to include ethyl- and butyl-acetate, ethanol, butanol, acetone, carbon tetrachloride, toluene, kerosene and PPG itself. Magnetic and rheological properties of the samples were investigated. Based on the results of investigation it has been concluded that magnetic nanoparticles are covered by a monolayer of surfactant molecules. At low temperatures the propanol-based sample preserves fluidity up to −115 °C. Measurement of critical temperatures of other base fluids showed that alcohols are the best carrier medium. Coagulation stability of the ethanol-based ferrocolloid with respect to water and kerosene was explored. It has been found that kerosene, whose fraction by weight exceeds 22.5%, does not mix with the colloid. This effect can be used to produce magneto-controllable extractors of ethyl alcohol. Under the action of water the colloid coagulates, which allows one to substitute the carrier fluid and to separate the colloid into fractions.